Monitoring platform user manual
Chapter 1 Monitoring platform user instruction
Visit to monitoring platform to enter the monitoring administration page.
1.1 Homepage description
The user is able to enquire the elevator status through the BS No., factory serial No., project name or address from the homepage through the following buttons like “All elevators”, “Online elevators”, “Breakdown elevators”, “Offline elevators” and “My favourite”, enquire All elevators (all elevators within the system regardless of any status), Online elevators (elevators currently are online), Breakdown elevators (elevators currently are breakdown, if the breakdown has been solved then it will be removed from the list), Offline elevators (elevators under offline status, out from the monitoring range), My favourite (elevators that users are concerning) during any status.
Click on “Favourite” button of any elevator to add it to “My favourite” elevator list, click “Remove favourite” to remove from “My favourite” elevator list.
It is possible to view the elevator related information via elevator information block diagram, elevator name is shown on the upper part of the block diagram and the elevator running status is shown at the lower left corner of the block diagram, and current floor position is shown on right. Normal state green，As shown above the module overlay（READY、ARREARS、EXPIRE、SHUTDOWN、CANCEL），Indicates the current payment status of this elevator。Ready state indicates that this elevator flow within the test 20K，The expiring status indicates that the elevator is still a month away from the payment date，This elevator has to pay arrears status（can receive error，limit 1 month），shut down state and cancel state indicate arrears 1 month at least，can receive none.As shown in the picture:
1.1.1 Elevator home page block diagram
Homepage default is to display all elevators, as the following page shown below:
1.1.2 Homepage "All elevator" page
Click “Online elevator” to display online elevator, as the following page shown below:
1.1.3 Homepage “Online elevator” page
Click “Breakdown elevator” to display breakdown elevator, as the following page shown below:
1.1.4 Homepage “Breakdown elevator” page
Click “Offline elevator” to display offline elevator, as the following page shown below:
1.1.5 Homepage “Offline elevator” page
Click “My favourite” to display my favourite elevator, as the following page shown below:
1.1.6 Homepage “My favourite” page
Click block diagram to enter elevator monitoring interface, monitoring page as follow:
1.1.7 Elevator detail operation page
Users are able to view elevator’s basic information, running direction, floor position, car call, hall call, elevator operating mode and current status and etc. through monitoring page. Through the view parameter, remote control, statistical analysis, error record buttons to switch to different interfaces.
Click view parameter to enter view parameter interface, as shown in picture:
1.1.8 View Parameter page
Click on remote control to select control method: Remote control stop and remote force landing, click remote stop will give remote stop command, click on remote force landing will give remote force landing command. As shown in picture:
1.1.9 Remote control page
Click on the breakdown statistic to enter breakdown statistic page; click on breakdown record, to enter breakdown record page.
Click on map location, will display project name on map, as the following page shown below:
1.1.10 Map location page
Click on the right side of elevator monitoring page "Landing display setting" button, you can set the elevator absolute floor number and the corresponding displaying floor number. As the following page shown below:
1.1.11 Landing display setting page
On the monitoring page left side, if the number button is being selected it means having hall calls (Someone has made hall call from outside the elevator), hall calls are referred to up hall call and down hall call.
Up call
：Someone from outside elevator has pressed up call button, up triangle is light up.
Down call
：Someone from outside elevator has pressed down call button, down triangle is light up.
Both up and down calls
：Someone from outside elevator has pressed both up and down buttons, both up and down triangle are lighten up.
On the right side of the monitoring page, if there is number next to car call, it means there is car call registration (car call made by passenger in the elevator). 
。
There are five types of running mode: auto, parking, inspection, fire and attendant. If the blue icon has lightened up, means it is running in that particular running mode. Auto operation means elevator is under normal status and it can serve passengers and accept car call and hall call normally; Parking means elevator will not respond to any hall calls, it will complete all car call before return to parking floor; inspection is used during system commissioning, maintenance, inspection; Fire status elevator will clear all car calls and hall call, and automatically returns to fire floor; Attendant status elevator will only respond to car calls, will not respond to hall call.
1.1.12 Elevator running mode page
Error indication, safety circuit indicator, overload indication, door lock circuit indication and levelling indication are basic information for elevator operation, while elevator is in a certain state it will display the corresponding icon below, the icons are:
1.1.13 Elevator indicator page
When there is breakdown, error indicator will light up; when no breakdown, indicator will be off.
When elevator is online, the safety circuit indicator is light up; when offline, safety circuit indicator will be off.
When elevator is overload, overload indicator will light up, otherwise it is off state.
When elevator doors are close, door lock circuit is closed, indicator will light up; when elevator doors are open at floor level, door lock circuit is open, indicator will be off.
When elevator has reached to floor levelling position, levelling indicator will light up; when out of levelling, levelling indicator will be off.
1.2 Elevator Location
"Elevator Location" is used in map for displaying elevator detail information; it is able to search information from the map by using elevator BS No. and elevator name. When clicking on the elevator, a dialog window will pop up for clicking "Real-time Monitoring", this is to view the elevator real-time running status.
"Elevator Location" page as shown below:
1.2.1 Elevator Location page
Click the elevator detail information dialog on the map, "Real-time Monitoring" page as follows:
1.2.2 Elevator real-time monitoring page
1.3 Arrears Reminder
"Arrears Reminder" is used to remind user about elevator payment situation, it is divided into "Going to expire", "Has expired" and "Normal". Elevator BS No., factory serial No., project name, SIM card number, last payment time, Next Payment Date, person in charge and his/her telephone number can be seen in this page. Click on Edit to modify the elevator Next Payment Date，Can import and payment operation，You can filter out the required WCR information through the current payment status.
"Arrears Reminder" page, default setting is Expiring, as the following page shown below:
Arrear reminder page
1.4 Error record
In the error record page, user can use elevator BS No., factory serial No., project name, error name and error code to check the elevator. The information can be seen directly from the page are: BS No., factory serial No., project name, error code, error name, error happened time, error happened floor, levelling state (√：levelled, ×：non-levelled); click on "Export" button to export the error information to Excel file, this exporting can export all information as well as those filtered information; click on detail to view the elevator detail error information page.
Error record page, as following:
Error record page
1.5 Error manager
In this function, the user can query failure by keyword.Can view the fault number, fault handling methods and other information，In addition to the right can be set which fault SMS alarm, which is not SMS alarm
1.6 Error statistic
In this feature, user can use BS No., factory serial No., project name, error code and error name to check the elevator. The information can be seen directly from the page are: BS No., factory serial No., project name, error code, error name, Number of Errors happened; click on the single elevator statistical chart to enter the elevator statistic chart page as shown in the following. Single elevator statistic page can be counted according to date.
Error statistic page as following:
Error statistic page
In the elevator error searching page, enter anyone of the following, BS No., factory serial No., project name, error code and error name to check the elevator. As the following page shown below:
Error statistic, press "BS No." query page
Error statistic, press "Project name" query page
Error statistic, press "Error code" query page
Error statistic, press "Error name" query page
Click on "Single elevator chart statistic" to enter elevator statistic chart page. Single elevator chart statistic page is counted according to date. The default display for statistic result is using histogram, different colour representing different types of error, the default statistic errors are the latest five errors, move the mouse on every error bar to display the quantity. As the following page shown below:
Error statistic, histogram statistics page
Click on "Table Mode" to display the statistic error in table format, as the following page shown below:
Error statistic, table mode statistic page
1.7 SMS setup
In this feature, user can use BS No., factory serial No., project name to check the elevator; click on the setup to set the alarming man and his mobile number, columns with "*" must be filled in, saving is possible after filling. When elevator encounters breakdown, through the alarming man mobile number to inform the alarming man. Click delete to delete the alarming man and alarming man number.
SMS setup page
Click on "Setup" button to setup the alarming man and his number, as the following page shown below:
SMS setup, setup alarming number page
Fill in alarming man and alarming man mobile number, click on "Save", alarming man information will appear on the alarming man list, as the following page shown below:
SMS setup, fill in alarming man information page
SMS setup, save the fill in alarming man information page
Click on "Send test SMS" to send test SMS to alarming man mobile, if he receives that SMS, it proves the communication is normal, when elevator appears abnormal, the system will automatically send the abnormal information to alarming man, so that to attend the maintenance on time.
SMS setup, send test SMS page
1.8 SMS configuration batch modify
In this message configuration can be modified batch information
SMS configuration batch modify page
1.9 SMS statistics
Here you can view the specific situation of SMS statistics，Including the cumulative number of sending messages and other information
SMS statistics page
2.0 Annual inspection management
View upcoming and expired elevator that requires annual inspection
Annual inspection management page
2.1 Payment record
Check the payment record information of elevator
Payment record page
The second chapter roles, users, resources, elevator related functions
First, the elevator administrator can create a number of users, and then, the administrator through the user role binding to specific user specific roles. Secondly, through role management, different roles can be given different permissions. Of course, only the administrator can add the elevator, only the administrator can be the user and the elevator binding. Specific steps are as follows:
2.1 To "user management", click the Add button in the upper right corner to create the user.
2.2 Enter the "user role binding", the first step, select the second step on the left side of the user, select the appropriate role.
2.3 Into the role of management, the role of the corresponding management, the first step, select the left side of the role of the second step, select the right resources to maintain (the corresponding role function) click on the upper right corner of the binding button for binding.Note: role management and other management is separate, it is not necessary in this order, the role can be understood as the Department, the role of management is the division of responsibilities.
2.4 Add the elevator into the "elevator management" click on the top right corner to complete the elevator to add.
2.5 Into the "user elevator binding" is only the administrator has the authority to carry out the elevator and the user's binding. The first step, select the second step on the left side, the right side of the user to select the third step, click on the upper right corner of the "binding" button to bind.
2.6 Into the "elevator user binding", the function is similar to the user's elevator binding, but the affiliation changes. Only administrator privileges. The first step, select the second step on the left side of the user, select the right elevator in the third step, click on the upper right corner of the "binding" button to bind.
